Directly controlled 15 mm solenoid valves are suitable for assembling on multiple or single bases.

They have a low power consumption and a small monostable button for an eventual manual intervention.

The solenoid valves directly controlled are suitable for assembling on multiple or single bases; they have a low consumption of energy and have a small monostable control for an eventual manual intervention.

 

NEW: now available in the new version with M8 thread for a quick and secure mounting.

The direct control solenoid valves are particularly indicated for the assembling in any position thanks to their small dimensions. They are available in sizes M5, 1/8, 1/4 and with functions 3/2 NC (normally close) o NO (normally open).

The electro valves with modular assembling system, on molded piece or on Omega bar DIN EN 50022.

They grant quick reaction time and the possibility to manually act on the bi-stable screw.

They are available in the version 3/2 NC (normally close) o NO (normally open) and the thread is G1/8.

Airwork’s solenoid valves VY series combine big resistance, reliability and versatility of assemblage.

VY series can be assembled in several ways: in-line, on panel, on multiple bases, on manifolds and directly on cylinders.

Available size are G1/8″, G1/4″ and G1/2″, and functioning can be 3/2, 5/2 and 5/3.

This system allows the installation of a series of 1/8 solenoid valves with different functions: 5 / 2 monostable 5 / 2 bistable and 5 / 3, through a a printed circuit board inserted in an aluminum shell with a female connection SUB-D 25 pin; this avoids the wiring of each valve. Thanks to a simple and intuitive coding system, it is possible to order the island with mounted and tested solenoid, or also to just order the island and mount the solenoid valves at a later date.

Coils BO series realized by Airwork have been designed to guarantee high performances.

They are available with Alternate or Direct Current (AC/DC) and multiple voltages: from the newest 12V, to the most common 24V, 110V, 220V.

 

These coils can be used on several valves available into Airwork’s range:

VY – Solenoids valves
VD – Direct valves
VU – Namur valves
VI – ISO 5599/1 valves

Airwork presents the new series of valves VA, designed to answer to the requests always more demanding of reduced dimensions without giving up to solidity and robustness. Here is our answer, a series of valves electrically and pneumaticallycontrolled with width 15mm entirely made in aluminium.
The VA series is pre-arranged with air outlets directly on the valve body;
this allows the use both single (with the valve applied on the panel or on the cylinder) or on modular sub-base, thus obtaining the
maximum versatility.
Key points:
– reduced dimensions (15 mm)
– low current absorption (1W)
– modern design and compactness, which renders the installation easy and avoids the accumulation of dirt
– components made of metal in order to guarantee a long duration even in demanding environments
– flexibility: the valve can be assembled singly on the wall, on sub-bases and on multi-polar connecting unit
– 4 different types of connection: lower, lateral,DIN 15 mm and the newest M8
– led indicating functioning, well visible
– monostable manual acting
– sub-base with exclusive modular system

Airwork introduce the multipolar connection system for VA series solenoid valves.
This accessory allows the possibility to install a series of valves electrically controlled on an aluminium sub-base.
In this way, you can control them together thanks to the usage of a 25-pin SUB-D cable.

 

Moreover, it’s possible to discover more information about VA Series valves at their dedicated page, by clicking here.

Airwork presents the new series of valves VB, designed to answer to the requests always more demanding of reduced dimensions without giving up to solidity and robustness.

Here is our answer, a series of valves electrically or pneumatically controlled with width 15mm entirely made in aluminium.

The VB series is designed with air port outlets to make easier the installation of the tubes on the plant.

 

Key points:

– reduced dimensions (15 mm)

– low power absorption (1 W)

– modern design and compactness, which renders the installation easy and avoids the accumulation of dirt

– components made of metal in order to guarantee a long duration even in demanding environments

– 4 different types of connection: lower, lateral, DIN 15mm and the newest M8.

– led indicating functioning, well visible

– monostable manual acting

– sub-base with exclusive modular system

The newborn VH2 series valve island proposed by Airwork, represents the new trend in the pneumatic field, which responds to the increasing need of energy saving and reduced dimensions while maintaining suitable flow rates.
It’s proposed in multipolar system with D-SUB 25 pin connection or with FLAT cable.

 

Key-points:

– Small size (15mm)
– Low power consumption (0.85W)
– Compact and clean design
– Metal components for longer life even in harsh environments
– Fast response thanks to latest generation solenoids
– Manual operating easily accessible
– LED indicator integrated in the solenoid
– Sub-base with exclusive modular system
– All packs are delivered assembled and tested

VI Series complies with ISO 5599/1 norms.

They are entirely made in aluminium in order to grant strength and long durability.

They come in sizes ISO 1 and ISO 2  with different bases according to different applications.

 

ISO 3 is available upon request.

Pneumatic and solenoid valves complying with NAMUR norms (direct assembly). Valves are entirely made in aluminium, to improve the solidity and the durability.

They are available in size G1/4″ with functions 3/2 or 5/2 (both monostable or bistable).

Silencers are used to reduce the noise generated by the valves during their functioning.
They can be made of different materials (combinations too) as: brass, stainless steel, plastic, bronze, polyethylene.

VQ direct electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive).

The extremely compact brass body, gives to them the possibility to be used in very small places.

They’re available in different versions as 2/2, 3/2 NC and NO and with NBR, Viton or EPDM seals.

VQ indirect electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive).

The extremely compact brass body, gives to them the possibility to be used in very small places.

They’re available in different versions as 2/2, 3/2 NC and NO and with NBR, Viton or EPDM seals.

VQ membrane electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive).

The extremely compact brass body, gives to them the possibility to be used in very small places.

They’re available in different versions as 2/2, 3/2 NC and NO and with NBR, Viton or EPDM seals.

VQS condensed drain valves are necessary to secure the optimal status of all different components of a compressed air treatment system.

Electric and timed, it’s programmable to discharge the drain in a specific time interval. The aim is to maintain the system in the best functioning condition.

Its functioning is automatic and requires less compressed air during the exhaust process.