Microvalves with plug button 3/2 NO or NC with several actuation options, mechanical or manual.
Thanks to the usage of the adaptor all actuators can be mounted on microvalves and it is also possible to combine two microvalves to obtain functions 5/2 and 5/3 (OC or CP)
Directly controlled 15 mm solenoid valves are suitable for assembling on multiple or single bases.
They have a low power consumption and a small monostable button for an eventual manual intervention.
The solenoid valves directly controlled are suitable for assembling on multiple or single bases; they have a low consumption of energy and have a small monostable control for an eventual manual intervention.
NEW: now available in the new version with M8 thread for a quick and secure mounting.
The direct control solenoid valves are particularly indicated for the assembling in any position thanks to their small dimensions. They are available in sizes M5, 1/8, 1/4 and with functions 3/2 NC (normally close) o NO (normally open).
The electro valves with modular assembling system, on molded piece or on Omega bar DIN EN 50022.
They grant quick reaction time and the possibility to manually act on the bi-stable screw.
They are available in the version 3/2 NC (normally close) o NO (normally open) and the thread is G1/8.
Airwork’s solenoid valves VY series combine big resistance, reliability and versatility of assemblage.
VY series can be assembled in several ways: in-line, on panel, on multiple bases, on manifolds and directly on cylinders.
Available size are G1/8″, G1/4″ and G1/2″, and functioning can be 3/2, 5/2 and 5/3.
This system allows the installation of a series of 1/8 solenoid valves with different functions: 5 / 2 monostable 5 / 2 bistable and 5 / 3, through a a printed circuit board inserted in an aluminum shell with a female connection SUB-D 25 pin; this avoids the wiring of each valve. Thanks to a simple and intuitive coding system, it is possible to order the island with mounted and tested solenoid, or also to just order the island and mount the solenoid valves at a later date.
Coils BO series realized by Airwork have been designed to guarantee high performances.
They are available with Alternate or Direct Current (AC/DC) and multiple voltages: from the newest 12V, to the most common 24V, 110V, 220V.
These coils can be used on several valves available into Airwork’s range:
VY – Solenoids valves
VD – Direct valves
VU – Namur valves
VI – ISO 5599/1 valves
Airwork’s pneumatic valves combine big resistance, reliability and versatility of assemblage; the VK series can be assembled in several ways: in-line, on panel, on multiple bases, on manifolds and on cylinders. Available size are 1/8,1/4 and 1/2, the available functions are 3/2, 5/2 and 5/3.
Pneumatic and solenoid valves complying with NAMUR norms (direct assembly). Valves are entirely made in aluminium, to improve the solidity and the durability.
They are available in size G1/4″ with functions 3/2 or 5/2 (both monostable or bistable).
Wide range of manual valves with different configurations: 90° lever, lever on top, push/pull, with adaptor for all panel buttons.
Available in size G1/8″ and G1/4″, available functions are 3/2, 5/2, 5/3.
Entirely in aluminium to grant strength and long durability.
Mechanical operated Valves , entirely in aluminium to ensure strength and durability.
Available size is 1/8 and with function 3/2 or 5/2.
The pedal valves are available with protection or without protection, with or without lock, and available functions are 3/2 and 5/2.
The large base ensures stability during the usage.
VQ direct electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive).
The extremely compact brass body, gives to them the possibility to be used in very small places.
They’re available in different versions as 2/2, 3/2 NC and NO and with NBR, Viton or EPDM seals.