The direct control solenoid valves are particularly indicated for the assembling in any position thanks to their small dimensions. They are available in sizes M5, 1/8, 1/4 and with functions 3/2 NC (normally close) o NO (normally open).
The electro valves with modular assembling system, on molded piece or on Omega bar DIN EN 50022.
They grant quick reaction time and the possibility to manually act on the bi-stable screw.
They are available in the version 3/2 NC (normally close) o NO (normally open) and the thread is G1/8.
Airwork’s solenoid valves VY series combine big resistance, reliability and versatility of assemblage.
VY series can be assembled in several ways: in-line, on panel, on multiple bases, on manifolds and directly on cylinders.
Available size are G1/8″, G1/4″ and G1/2″, and functioning can be 3/2, 5/2 and 5/3.
This system allows the installation of a series of 1/8 solenoid valves with different functions: 5 / 2 monostable 5 / 2 bistable and 5 / 3, through a a printed circuit board inserted in an aluminum shell with a female connection SUB-D 25 pin; this avoids the wiring of each valve. Thanks to a simple and intuitive coding system, it is possible to order the island with mounted and tested solenoid, or also to just order the island and mount the solenoid valves at a later date.
Airwork’s pneumatic valves combine big resistance, reliability and versatility of assemblage; the VK series can be assembled in several ways: in-line, on panel, on multiple bases, on manifolds and on cylinders. Available size are 1/8,1/4 and 1/2, the available functions are 3/2, 5/2 and 5/3.
Airwork introduce the multipolar connection system for VA series solenoid valves.
This accessory allows the possibility to install a series of valves electrically controlled on an aluminium sub-base.
In this way, you can control them together thanks to the usage of a 25-pin SUB-D cable.
Moreover, it’s possible to discover more information about VA Series valves at their dedicated page, by clicking here.
Airwork presents the new series of valves VB, designed to answer to the requests always more demanding of reduced dimensions without giving up to solidity and robustness.
Here is our answer, a series of valves electrically or pneumatically controlled with width 15mm entirely made in aluminium.
The VB series is designed with air port outlets to make easier the installation of the tubes on the plant.
– reduced dimensions (15 mm)
– low power absorption (1 W)
– modern design and compactness, which renders the installation easy and avoids the accumulation of dirt
– components made of metal in order to guarantee a long duration even in demanding environments
– 4 different types of connection: lower, lateral, DIN 15mm and the newest M8.
– led indicating functioning, well visible
– monostable manual acting
– sub-base with exclusive modular system
Wide range of manual valves with different configurations: 90° lever, lever on top, push/pull, with adaptor for all panel buttons.
Available in size G1/8″ and G1/4″, available functions are 3/2, 5/2, 5/3.
Entirely in aluminium to grant strength and long durability.
Mechanical operated Valves , entirely in aluminium to ensure strength and durability.
Available size is 1/8 and with function 3/2 or 5/2.
The inline flow regulator regulates the speed of the pneumatic cylinders and they can be:
One-way: the regulation is in one way
Two-ways: the regulation is in two ways
The flow regulator can be mounted on the panel/board.
RFX flow regulators, produced in stainless steel AISI 316L, can be used in several fields: food and beverage, pharmaceutical, or in particularly aggressive environments.
The selector valve can control two different inputs, choosing one or the other, but using only one way out.
This valve allows the transit of the air only in one way, the valve stops it in the opposite way.
They are available with male or female thread, in several dimensions.
Stainless steel AISI 316L non-return valves, are designed for harsh usage conditions. The driven shutter and the spring never compressed completely, guarantee very high intervention frequencies.
The quick exhaust valve allows to exhaust the air in the cylinder to increase the speed.
We suggest the mounting directly on the cylinder’s supply
Airwork’s VRX quick exhaust valves allow the possibility (if mounted on a pneumatic cylinder) to discharge rapidly the pressure contained inside it. Thanks to the material used for their realization (stainless steel AISI 316L), they allow the usage in particularly harsh or very delicate environments such as food and beverage and pharmaceutical.
The stop valve is a pneumatic device that locks the cylinder’s stroke in case of pressure loss in the system.
The valves are mounted directly on the cylinder’s supplying ports and do not interfere with the functioning of the cylinder.
The slide valves with switch on/off, allow the exhaust of the air (position off).
They are ON/OFF valves for various application areas: air, water and hydraulic circuits, and it’s also possible the use for pneumatic vacuum.
Silencers are used to reduce the noise generated by the valves during their functioning.
They can be made of different materials (combinations too) as: brass, stainless steel, plastic, bronze, polyethylene.
VQ direct electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive).
The extremely compact brass body, gives to them the possibility to be used in very small places.
They’re available in different versions as 2/2, 3/2 NC and NO and with NBR, Viton or EPDM seals.