The direct control solenoid valves are particularly indicated for the assembling in any position thanks to their small dimensions. They are available in sizes M5, 1/8, 1/4 and with functions 3/2 NC (normally close) o NO (normally open).

VD31, VD32, VD33

Airwork’s solenoid valves VY series combine big resistance, reliability and versatility of assemblage.

VY series can be assembled in several ways: in-line, on panel, on multiple bases, on manifolds and directly on cylinders.

Available size are G1/8″, G1/4″ and G1/2″, and functioning can be 3/2, 5/2 and 5/3.

VY83, VY85, VY86, VY43, VY45, VY46, VY23, VY25, VY26

Airwork’s pneumatic valves combine big resistance, reliability and versatility of assemblage; the VK series can be assembled in several ways: in-line, on panel, on multiple bases, on manifolds and on cylinders. Available size are 1/8,1/4 and 1/2, the available functions are 3/2, 5/2 and 5/3.

VK83, VK85, VK86, VK43, VK45, VK46, VK23, VK25, VK26

Pneumatic and solenoid valves complying with NAMUR norms (direct assembly). Valves are entirely made in aluminium, to improve the solidity and the durability.

They are available in size G1/4″ with functions 3/2 or 5/2 (both monostable or bistable).

VU43, VU45

Wide range of manual valves with different configurations: 90° lever, lever on top, push/pull, with adaptor for all panel buttons.

Available in size G1/8″ and G1/4″, available functions are 3/2, 5/2, 5/3.

Entirely in aluminium to grant strength and long durability.

VM40

Mechanical operated Valves , entirely in aluminium to ensure strength and durability.

Available size is 1/8 and with function 3/2 or 5/2.

VM40

The pedal valves are available with protection or without protection, with or without lock, and available functions are 3/2 and 5/2.

The large base ensures stability during the usage.

VP40

The inline flow regulator regulates the speed of the pneumatic cylinders and they can be:

One-way: the regulation is in one way
Two-ways: the regulation is in two ways

The flow regulator can be mounted on the panel/board.

RF40

RFX flow regulators, produced in stainless steel AISI 316L, can be used in several fields: food and beverage, pharmaceutical, or in particularly aggressive environments.

RFX0

The selector valve can control two different inputs, choosing one or the other, but using only one way out.

VS01, VS02, VL22

This valve allows the transit of the air only in one way, the valve stops it in the opposite way.

They are available with male or female thread, in several dimensions.

VR40

Stainless steel AISI 316L non-return valves, are designed for harsh usage conditions. The driven shutter and the spring never compressed completely, guarantee very high intervention frequencies.

VRX0

The quick exhaust valve allows to exhaust the air in the cylinder to increase the speed.

We suggest the mounting directly on the cylinder’s supply

Airwork’s VRX quick exhaust valves allow the possibility (if mounted on a pneumatic cylinder) to discharge rapidly the pressure contained inside it. Thanks to the material used for their realization (stainless steel AISI 316L), they allow the usage in particularly harsh or very delicate environments such as food and beverage and pharmaceutical.

The stop valve is a pneumatic device that locks the cylinder’s stroke in case of pressure loss in the system.

The valves are mounted directly on the cylinder’s supplying ports and do not interfere with the functioning of the cylinder.

VO02, VO03, VO22, VO23, VO24, VO25, VO04, VO05

The slide valves with switch on/off, allow the exhaust of the air (position off).

VR40

They are ON/OFF valves for various application areas: air, water and hydraulic circuits, and it’s also possible the use for pneumatic vacuum.

BV01, BV02, BV03, BV04, BV05, BV07, BV21, BV22

Silencers are used to reduce the noise generated by the valves during their functioning.
They can be made of different materials (combinations too) as: brass, stainless steel, plastic, bronze, polyethylene.

SI40

VQ direct electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive).

The extremely compact brass body, gives to them the possibility to be used in very small places.

They’re available in different versions as 2/2, 3/2 NC and NO and with NBR, Viton or EPDM seals.

VQD1

VQ indirect electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive).

The extremely compact brass body, gives to them the possibility to be used in very small places.

They’re available in different versions as 2/2, 3/2 NC and NO and with NBR, Viton or EPDM seals.

VQI1, VQI3

VQ membrane electrovalves, are particularly suitable to control water, air, inert gas, steam and for all fluids in general (not aggressive).

The extremely compact brass body, gives to them the possibility to be used in very small places.

They’re available in different versions as 2/2, 3/2 NC and NO and with NBR, Viton or EPDM seals.

VQM1, VQM3