MC Series – ISO 6432 Cylinders
Airwork’s ISO 6432 microcylinders are manufactured with the highest quality levels and have bore sizes between Ø8 and 25 mm therefore they allow the possibility to be used in several applications.
Both aluminum heads are fixed to the stainless steel tube by a rolling process.
ISO 6432 cylinders can be realized with double or single effect (pushing or pulling), magnetic, with bumper or cushioned.
Their fixing accessories are also available and special designs can be realized on customer demand.
There is also the possibility to have a full stainless steel version with MX series page.
MC30, MC50, MC60
MX Series – ISO 6432
ISO 6432 cylinders of MX series are entirely made of stainless steel and with highest quality levels.
They are available with bores Ø16, 20 and 25 mm.
Heads are fixed to the stainless steel tube through a rolling process, therefore they are ideal for specific fields, like the food industry, pharmaceutical industry, marine environments.
ISO 6432 stainless steel cylinders are available in different versions, single or double effect, magnetic, cushioned.
A complete range of fixing accessories is available and the production of customized cylinders on drawing is possible too.
They are available in the standard aluminium version MC series.
MX01, MX03, MX05, MX07
CM series compact cylinders made by Airwork comply the ISO 21287 norm.
They are particularly suitable for small spaces thanks to their reduced dimensions while maintaining excellent stability and strength.
Bores from the newest Ø12 mm to 100 mm, with fixing position according to the ISO norm.
CM01, CM02, CM03, CM13, CM15, CM29, CM31
Newest compact guide cylinders are Airwork’s top of the range. This linear actuator offers a very high robustness combined with very small dimension.
It has a central pneumatic cylinder and the guiding system is based on rods with very big diameters which move on self lubricant brass bearings or balls sleeves.
It is possible to install the cylinder in different positions and to change the orientation of the feeding devices, according to different needs.
Magnetic sensors can be added foldaway.
Discover more with this video:
CC30, CC31, CC33, CC34, CC60, CC61, CC63, CC64
Airwork’s guided compact cylinder CC series family grows thanks to a new version with a self-regulating pneumatic cushioning.
It’s a simple system that offers many advantages:
– It’s a low-cost cushioning system
– The end-stroke shock noise is totally removed
– It’s always available because it’s realized with standard components
– Thanks to the pneumatic cushioning it’s possible to increase the speed rather than the standard version
CD series, is the new short stroke cylinder who replaces the previous CE series.
Airwork short stroke cylinders are engineered to guarantee good performances in very reduced spaces. They are available in different version: double acting, single acting and with through rod.
Available in different dimensions from Ø16 to Ø100 mm, thanks to their small dimension and high performances, are suitable for applications in reduced spaces.
The body has grooves for the installation of sensors.
CD01, CD02, CD03, CD04, CD15, CD16
Airwork’s guide units are engineered for cylinders complying with ISO 15552 and 6432 VDMA norms.
They are recommended for the deplacement of high loads and where also high speed and precision of positioning are requested.
These characteristics renders this guide unit suitable for use in several industrial fields, like in loading lines, in the packaging industry and the automation in general.
Magnetic switches are accessories that allow to identify the position of the piston inside the cylinder.
They have different shapes, oval, round or “T”, and they are available in two versions, REED or HALL.
Cylinders onto whom is possible to mount oval switches are:
CY / CZ / CA / CM / CC / SS / RY
Cylinders onto whom is possible to mount “T” switches are:
MC / MX / CT / CQ / CM / CX / CC / SS / BS / ST
Cylinders onto whom is possible to mount round switches are:
AT / CD / PA / PG / PH / PS / PX