MC Series – ISO 6432 Cylinders

Airwork’s ISO 6432 microcylinders are manufactured with the highest quality levels and have bore sizes between Ø8 and 25 mm therefore they allow the possibility to be used in several applications.

Both aluminum heads are fixed to the stainless steel tube by a rolling process.
ISO 6432 cylinders can be realized with double or single effect (pushing or pulling), magnetic, with bumper or cushioned.
Their fixing accessories are also available and special designs can be realized on customer demand.

There is also the possibility to have a full stainless steel version with MX series page.

 

Cartridge cylinders CH series have extremely reduced dimensions.
Secondly, thanks to the threaded body it can be installed in any part of the machine.
The air sealing between threaded hole and cylinder is done through the usage of an o-ring.

Newest compact guide cylinders are Airwork’s top of the range. This linear actuator offers a very high robustness combined with very small dimension.

It has a central pneumatic cylinder and the guiding system is based on rods with very big diameters which move on self lubricant brass bearings or balls sleeves.

It is possible to install the cylinder in different positions and to change the orientation of the feeding devices, according to different needs.

Magnetic sensors can be added foldaway.

 

Discover more with this video:

 

Magnetic switches are accessories that allow to identify the position of the piston inside the cylinder.

They have different shapes, oval, round or “T”, and they are available in two versions, REED or HALL.

 

Cylinders onto whom is possible to mount oval switches are:

CY / CZ / CA / CM / CC / SS / RY

 

Cylinders onto whom is possible to mount “T” switches are:

MC / MX / CT / CQ / CM / CX / CC / SS / BS / ST

 

Cylinders onto whom is possible to mount round switches are:

AT / CD / PA / PG / PH / PS / PX